BTVHT - 88-210 SATINHIDE LATEX S/G DEEPTONE BASE

  • MSDS: BTVHT
  • Manufacturer: PPG INDUSTRIES
  • Product Name: 88-210 SATINHIDE LATEX S/G DEEPTONE BASE
  • National Stock Number: 8010-00F036141
Product Identification

Product ID:88-210 SATINHIDE LATEX S/G DEEPTONE BASE
MSDS Date:11/25/1992
FSC:8010
NIIN:00F036141
MSDS Number: BTVHT

Responsible Party
PPG INDUSTRIES
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555/800-441-9895

Cage: PPGIN

Contractor
PPG INDUSTRIES
ALLISON PARK, PA 15101-5000 US

Telephone: 412-492-5555/304-843-1300

Cage: PPGIN

Ingredients

TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN BY IARC

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


CLAY (KAOLIN), ALUMINUM SILICATE

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 5-10%

ACGIH TLV: 2 MG/CUM TOTAL DUST


2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 1-20%


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55-65%


FILM,FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 20-25%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL IF SWALLOWED.
EYES: IRRITATION. SKIN: SLIGHT IRRITATION, MAY BE ABSORBED.
INHALATION: VAPOR/SPRAY MIST MAY BE HARMFUL & AT ELEVATED
TEMPERATURES IRRITATES EYES, NOSE & THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, SWELLING.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. APPLY ARTIFICIAL RESPIRATION/OTHER SUPPORTIVE MEASURES
AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS, CO2, DRY CHEMICAL,
UNIVERSAL AQUEOUS FILM FORMING FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP
& POSSIBLE AUTOIGNITION/EXPLOSION. (SEE SUPP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE/BURST DUE
TO THE BUILD-UP OF STEAM PRESSURE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESPIRATORY/SKIN/EYE PROTECTION SHOULD BE
PERMITTED TO ENTER AREA. REMOVE ALL IGNITION SOURCES. TAKE UP
W/SAWDUST/VERMICULITE/OTHER ABSORB ENT MATERIAL & PLACE INTO
CONTAINERS FOR DISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDING DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS 111B COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF PART OF A MULTIPLE COMPONENT SYSTEM, READ MSDS OF
OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIXTURE MAY HAVE
HAZARDS OF ALL ITS PARTS.

Exposure Controls

Respiratory Protection:USE SUITABLE RESPIRATOR WHERE VENTILATION IS
INADEQUATE.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME/PATTERN TO KEEP
CONCENTRATION Protective Gloves:NITRILE, NEOPRENE, LATEX
Eye Protection:CHEMICAL SPLASH-PROOF GOGGLES
Other Protective Equipment:IMPERMEABLE APRON
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING/SHOES
BEFORE REUSE.
Supplemental Safety and Health
SPECIAL FIRE CONT'D: IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
FIRE-FIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS.

Chemical Properties

Boiling Pt:B.P. Text:212-471.2F
Vapor Pres:17.3
Vapor Density:>1
Spec Gravity:1.13
Evaporation Rate & Reference:(BU O AC = 100): 33
Solubility in Water:73.1%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
INGREDIENTS
Percent Volatiles by Volume:71.4

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIS/MINERAL ACIDS/OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, IGNITION SOURCES, ELEVATED
TEMPERATURES, FREEZING.
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.